16 Port T1 Groomer
MegaConnect-Jr. for
Hi-Z Non-Intrusive Monitoring
|
VCL-MegaConnect, the T1 (also available
in E1) 16 port Hi-Z Monitoring Groomer is available for
special non-intrusive monitoring (high impedance) applications in
which T1 (or E1) ports can be connected to monitoring / billing
equipment for non-intrusive monitoring of live traffic or
signaling, required by billing servers etc. |
 |
- The 16 T1 Port Groomer for Hi-Z
Monitoring (Data Sheet - PDF) provides upto 7 E1 links (14 E1 Ports)
plus 2 additional spare E1 ports (Normal-Z) to connect to the
measurement-probe, billing servers etc.
In the monitoring mode the Groomer
provides the user a total of 16, T1 (or E1) ports. 14, T1 ports
connect to the “live traffic” T1 links which are to be monitored,
non-intrusively (Hi-Z) in both transmit and receive directions. 2
additional T1 (or E1) ports connect to the monitoring equipment, such
as billing servers etc
The additional solutions are offered
and available for Hi-z non-intrusive live traffic monitoring
applications are:
The T1 Groomer (and E1 Groomer) are
capable of monitoring a -20dBdsx (0.3Volt Pulse) T1 (or E1) signal
through a Hi-Z path, without in any way disturbing the live T1 (or E1)
traffic that is required to be monitored. The T1 (or E1) connector(s)
shall be RJ45 120 Ohms (for T1) and 100 Ohms for T1 and a "Y" cable is
provided (included) to connect T1 (or E1) Groomer equipment to the T1
(or E1) ports that are required to be monitored.
The user shall have the full flexibility to choose and select upto a
maximum of 30 time-slots (to be monitored in 'both' transmit and
receive direction), through the internal TSI non-blocking switch, from
any of the 30 T1 ports that are required to be monitored.
Highlights
- 16 T1 (or E1) ports
- Stratum 3 clock
- Economical
- Compact
- Monitoring and Grooming applications
- Available with TCP-IP access facility for remote
monitoring & access
- 16 port T1 Monitoring Groomer for
Hi-z (Hi-Impedance) monitoring (PDF)
The VCL-MegaConnect, 16
Port T1 monitoring groomer, occupies only a 2U high rack-space, and is
a complete 19-inch standalone unit. The unit operates on a -48VDC
input power-supply (AC input adapter is optional for AC mains
operation).
The system is supplied
with an easy to use Windows (95, 98, Me, XP) Graphical User Interface
that provides the user a complete control to prepare multiple
configuration "maps" and store them as easy to read data files.
It may also accessed using CLI (Command Line Interface) through a
Serial (COM) Port of a PC using HyperTerminal text commands. Dry
contact relay alarms are also available at rear of the system to
connect the system to external audio and visual alarms outputs.
The VCL-MegaConnect, 16
Port T1 monitoring groomer also has a TCP - IP Access feature which
allows the DACS to be connected on a TCP/IP network (10/100 Base
Interface) for remote access for configuration and monitoring using
Telnet
Applications
- 16 Port (includes 2 ports for
connecting to monitoring equipment) T1 monitoring groomer
- Monitoring of “Live Traffic” on T1
links which are to be monitored, non-intrusively (Hi-Z) in both
transmit and receive directions
Indications and
Alarm Monitoring
- Loss of incoming signal at any T1
Port
- Configuration Error Alarm
- Clock Status
- 1 to 8 channel LED indicators to
indicate the status of each T1 channel
- +3 Volts Power Supply
- -48VDC present
-
Configuration Error
Programmable Features
- Specifying the priority sequence for
clock selection
- Enabling or disabling T1 channels
(masking) of the T1 channels that are not is use
- Creating a cross - connect between
T1s (and E1) at DS-O level (single time-slot level) using the
Windows based, easy to use GUI
- Telnet interface for remote
programming
Status Monitoring
|
